Things to be aware of when the cross-cutting machine is finished

The cross-cutting machine can be used for the cutting of paper materials such as coated paper, coated paper, kraft paper and paper-plastic composite, plastic sheet, etc., especially suitable for the production of paper industry and paper processing industry. Then, when using the cross-cutting machine, it is necessary to carry out regular maintenance, so as to ensure the smooth running of the machine and the cutting quality of the product.

First of all, the cross-cutting machine should be installed in a place that is dry, ventilated, with good light and convenient operation. Secondly, after each operation, it is necessary to clean the dust and paper scraps on the machine in time, check the cutter and the grinding wheel, check whether there is any abnormality in the running part, and reasonably add the lubricating oil. Side by side net oil moisture high and water storage tank. Finally, it is necessary to cut off the power of the cross-cutting machine according to the operation requirements of the manual and maintain the computer operating system.

The basic daily maintenance of the cross-cutting machine, the general principle is that the inspection, cleaning, and lubrication maintenance work is fully in place to ensure that the various components of the equipment are in good condition. In addition, it is also important to improve the technical quality and level of the operators. It is necessary to be responsible for the operation of the control part. No one is allowed to operate without permission.

Do a good job of maintenance and maintenance. First of all, daily maintenance should be in place. The principle is to lubricate, clean, clean (no dust, no debris) in place to ensure that the sliding part of the equipment is in good condition. Followed by maintenance work, regular and irregular inspections of the rotating parts (especially for real-time monitoring of consumables). Regular adjustments are made, regularly replaced, and detailed records are made to extend the life of the equipment. Regular cleaning and inspection of the electrical parts should be carried out in a timely manner to eliminate hidden dangers.

Use high quality slitters and cross cutters. Improve the technical quality and level of the operator, and be responsible for the operation of the control part. No one can operate it without permission.

Tr